AVE 2 Birthing Bed Cleaning Instructions

Do not use automated cleaning or sterilisation methods.
Use soft cloth and pH-neutral detergent for basic cleaning.
Avoid abrasive agents, ketone-based solvents, and excessive water ( to avoid risk of motor damage).
Disinfectants should be hospital-approved, applied by qualified personnel, and compatible with bed materials.
Never use phenolic-based cleaners or strong acids/alkalis.
Always rinse and dry thoroughly before reuse.
Do not exceed pH 9 for detergents.

Clean all surfaces: head/seat/foot sections, side rails, frame, undercarriage, castors, brake pedals, infusion stand, and accessories.
Lift the upholstery to clean hidden areas.
Do NOT use: Alcohol >30%, active chlorine, iodine, aldehydes.

Clean with warm water + neutral detergent; avoid abrasives and phenolic cleaners.
Dry thoroughly before reuse.
Disinfect using approved disinfectants.
Do NOT bleach or use solvents.

General cleaning: Warm water + neutral detergent; rinse and dry.
Disinfection:
- Top cover: Sodium hypochlorite (up to 10,000 ppm for heavy contamination; 5,000 ppm routine).
- Inner covers: Sodium hypochlorite up to 5,000 ppm.
Avoid strong acids, alkalis, solvents, and abrasives.
The top cover only can be washed in an industrial washing machine. However, it should not be used in a continuous industrial washing machine.
Do NOT bleach or steam sterilise.

Do NOT use: Phenolics, iodophors, peracetic acid, steam sterilization, dry heat.
Acceptable: Chlorine (1,000–10,000 ppm), alcohol (≤70%), hydrogen peroxide (3%), QAS (3–15%).

Always protect bed with hospital bedding, disposable sheets, or terrycloth covers before use.
Ensure all sections (seat, back, foot, leg rests) are properly coated.

Disable function buttons during cleaning.
Put upholstery/mattress back only on dry surfaces.
Improper cleaning can lead to infection risk or damage (not covered by warranty).

This contains all of the cleaning information for the AVE 2 Birthing Bed.